Quieter, Cooler Bedrooms in Etobicoke: A Full-Frame Window Replacement
A homeowner in Etobicoke came to us with one clear goal: make the second-floor bedrooms comfortable for sleeping again. Here is how we got there.

The challenge
The old wooden windows were long past their best. The bedrooms face the road, so traffic noise came straight in. They also get direct sun, which made the rooms uncomfortably hot every summer.
What we chose together
We went through the options with the homeowner and agreed on a solution for each problem:
Full-frame (stud-to-stud) installation. We removed the old windows completely, frames included, down to the studs. That gave us a clean opening to install, insulate and seal the new windows properly, instead of fitting a new unit inside an old frame.
Triple-pane glass. A third pane adds an extra barrier against outside sound, which matters a lot for bedrooms next to a road.
LoE 272 coating. This low-E coating helps keep the sun's heat out in summer while still letting natural light in.
Casement windows. Casements open outward with a crank, give good airflow, and close snugly against the frame.
Custom exterior aluminum capping. We wrapped the exterior wooden trim in custom aluminum capping to protect it from the weather.
Installation day
Our team removed the old windows, set the new casements in the opening, adjusted every sash and sealed the joints on the outside.
Your home, your way
The homeowner wanted to finish the interior trim himself, so we handled the windows and the exterior capping and left the inside ready for his finishing touches. We're always happy to adapt the scope to what works for you.
The result
New triple-pane casement windows in the bedrooms, chosen for quieter nights and cooler summers, with the exterior trim protected by aluminum capping.
Thinking about replacing your windows? We'll help you choose the right glass and installation method for your home.

Comments